Our success relies on you, so you can rely on us.Myostat Motion Control provides automation components, integrated servo and stepper motors, and engineering support. Cool Muscle CM1 and CM2 integrated servos, paired with planetary and right-angle gearboxes, rodless ballscrew stages, rack-and-pinion actuators, SR joints, and the cables to tie it all together.Integrated Servos One NEMA 17 package — motor, drive, encoder, controller The CM1-C is the workhorse of the Cool Muscle line: 0.53 N·m peak from a 42 mm frame, 50,000 ppr closed-loop control, and no separate drive cabinet. Program it directly in Cool Muscle Language over its UART serial ports. CM1-C-17L30E View CM1-C-17L30EIntegrated Servos A servo that runs the machine, not just the axis CM3+ adds a logic bank alongside the motion bank, so sequencing, I/O handling and decision-making happen on the motor itself. For simple cells it can remove the PLC from the bill of materials entirely. CM3+-17L50A View CM3+-17L50ARack Systems Rack and pinion when stroke length can't be fixed Ball screws set your travel at design time. The RA17 drives a stainless rack through a hardened pinion — 60 N continuous, 125 mm of travel per standard rack, and any length you like if you specify a custom one. RA17-08-200-17L30E-C View RA17-08-200-17L30E-CSpherical Joints Three axes of rotation with no measurable clearance Hephaist spherical rolling joints replace sliding contact with preloaded rolling elements. The result is near-zero friction and zero backlash — the reason they end up in semiconductor and optical positioning stages. SRJ012C-P View SRJ012C-PIntegrated Servos EtherCAT down to the motor, no drive cabinet in between A dedicated EtherCAT body with a two-port switch and CiA-402 profile, so the servo joins the fieldbus directly. Control and drive power are separated, which keeps the network alive while the power stage is safely de-energised. CM1-E-17L30D-RJ-S View CM1-E-17L30DIntegrated Servos Ethernet/IP servos that speak your PLC's language The CM1-T puts a native Ethernet/IP interface on the same 0.53 N·m NEMA 17 platform — a straightforward path onto Allen-Bradley and Rockwell architectures without a protocol gateway. Modbus TCP and CML over Ethernet run on the same hardware, so one motor covers PLC control, SCADA, and direct scripting. CM1-T-17L30D-RJ-S View CM1-T-17L30DRod Actuators Linear motion in a NEMA 11 footprint The CSR-11 folds a lead screw into the servo itself — 100 N of thrust and 25.4 mm of travel from a 28 mm frame, with no coupling, no external screw, and nothing to align. Where a full actuator won't fit, this usually will. CSR-11-2.54-25.4-CM1-C View CSR-11-2.54-25.4-CM1-CBench-test a CM3 before it ever sees the machine